Friday, October 23, 2026

Index of Entries, October 2026

Find a topic of interest in the lefthand column and note the associated date (month/year), then click on the associated year in the righthand column, and you should find your chosen entry nearby.

Easy Way to Create Fair Curves    10/26

Straight-sided kayak stems            09/26

Planking the Canoe                         02/26

A Small Canoe                                11/25

First Signs of a New Build             11/25

Designing a New Hull Shape          9/25

What should I Build Next?              9/25

Planking the New Kayak                6/25

Putting the Pieces Together             3/25

New Kayak Design, Part 2              1/25

Creating a New Kayak                    12/24

A 'Leaner' Kayak                             12/24

 Boating is more Satisfying....          8/24

What is Next?                                   6/24

Careers and a Hobby                        6/24

A Smaller Kayak                              12/23

Finishing the Planked Hull                7/23

Rules for Developable Hull surfaces 6/23

Finalized kayak Design                      1/23

Starting a New Design: Kayak           1/23

Now I Have a Boat to Look at            8/22

Next Step in Design Evolution          11/21

A Real Sharpie                                    3/21

Another Guide Boat                            2/21

Finishing the Guide Boat                    12/20

Finishing the Planking                        5/20

Creating a Developable Surface         5/20

Solving the Hull Sheathing Conform. 4/20

Planking the Guide Boat                     9/19

Garboard Sheathing                            7/19

Viking Ship Museum, Hull Fairing     6/19

Defining the Shape                              3/19

Creating a Boat 'Skeleton'                    3/19

Starting to Cut Wood                            2/19

First Steps for the New Design            12/18

The Improved Guide Boat                   10/18

Getting Ready to Build                         7/17

Completed New Model                         9/16

New Design Model, Part II                   8/16

Creating a Model for a New Design     8/16

Beautiful Boats of Scandinavia             7/16

Vietnam Memories                                10/15

Along the Adriatic Coast                       10/15

Grand Tetons N.P. Boating                     8/15

Modified 'Next Boat' Design                  4/15

Sail Design                                              2/15

Next Boat?                                              12/14

A Day at the Lake                                    9/14

Resting on its Design Waterline              7/14

At Flaming Gorge, Utah                          7/14

What a Day!                                             5/14

The New Boat Looks Complete               3/14

Why I use Rosin Paper                             3/14

The Boat Windshield                                2/14

Winter Progress                                         2/14

A Voyage to Remember                             11/13

Instrument Panel                                        11/13

Now for the Accessories                            10/13

Sample Developable Design Calculation   7/13

To the Deck and Onward                            7/13

Slow but Steady Progress                           5/13

Finally, the Hull is Turned Over                 1/13

Hull Sheathing                                            7/12

The Origin of Boat Bowls                           4/12

Another Year, Another Boat                        4/12

First Season Report                                     9/11

A Trial Run                                                  6/11

Finally in the Water!                                    5/11

Out of the Shop                                            12/10

Ready to Leave the Shop                             10/10

Finishing the Stern, Onto the Windshield     7/10

Wood Decking                                               7/10

Interior Details                                               6/10

Finally, the Hull is Upright                            4/10

Planking the Hull                                          11/09

Initial Hull Sheathing                                      8/09

The Design Becomes a Reality                       5/09        

Hull Design Using Simple Mathematics       12/08

Design Evolution                                             7/07

New Direction                                                 7/07

Model Lobster Boat                                       11/06

Updated Drawings                                           9/06

Maiden Voyage                                                5/06

A Semi-planing Powerboat                              5/06

Guide Boat Pictures                                         5/06

Adirondack Guide Boat Concept                     5/06

A Real Disappointment                                    5/06

Panama Skiff                                                    5/06

Kayoe or Canak?                                              5/06

Where did this Unusual Interest Originate?     5/06

Thursday, October 22, 2026

The Easy Way to Create Fair Curves

Picturing a hypothetical hull type in my mind, the first portion I start to formulate is the major chine.  I have described this process in previous entries, but recently, looking back on those entries, it didn't seem as clear and simple as when first described.  Over many years, I have mentally simplified the process, by skipping steps and not bothering to completely construct a mathematical formula.  Let me illustrate this easy method.

Recently, I saw a photo of a kayak hull with very long slender ends (which appeared to be straight lines of constant taper) and decided to try to mathematically describe a similar shape.  "X" is always the dimension I use for length, starting at the bow.  "Y" is the width offset measured from the midline.  For a kayak or canoe-type hull, I like to create offsets spaced about six inches apart (closer equals more accuracy), to be adjusted later.  A hull of this type will have a fine entry, slope x/y between 3/1 to 4/1 ratio.  The overall intended width would be between 26 and 30 inches; at the chine it should be several inches narrower.

With this information, I can start playing with numbers.  I say 'playing' because it usually takes several iterations to find harmony between width, length, bow half angle, and uncomplicated curve coefficients.  I will only discuss the 'Y" width dimension here, but similar considerations occur in creating the "Z" dimension, the upward sweep at the hull entry.

The curve we are trying to develop is controlled by the slope coefficient, curve length, and the number of segments subdividing that curve.  Using these three determinants, a custom curve closely approximating our design needs can usually be constructed.   For hulls of this type, I often choose a slope coefficient of 0.1 in calculating Y.  For "Z", I often use a smaller coefficient (i.e. 0.0625 or 1/16).  A blunter hull entry will require a larger slope coefficient.  Rather than taking you through the initial iterations I tested, let me describe the winning solution.  

A curve 48 inches long divided into eight (8) segments each six (6) inches long.  The total 'delta Y' (change in Y) will be 6.4 inches.  The end slope of this curve =2(6.4)/48 which condenses to x/y=1.6/6.  Each X segment is 6 inches long.  To the end of this curve, I added three more (constant slope) segments, 18 inches X length and 4.8 inches Y width. 

The total chine (curve plus constant slope segments) curve is 66 inches long with a total offset (width) of 11.2 inches.  That curve is slightly finer than I desired; thus, I shortened the segments to 5.5 inches long, resulting total length 60.5 inches and a bow half angle of 16.2 degrees.  The Y offsets are unchanged.  Then I added a straight parallel segment at the midsection of the hull to allow for topsides projections and arrive at a final half hull length of 77 inches.

Hopefully, the included diagram below will help clarify the procedure. 

As you can see, our major chine curve consists of two sections with matching slopes at their point of junction.  Here is a list of the X and Y offsets for each segment: (0, 0), (16.5, 4.8), (22, 6.3), (27.5, 7.6), (33, 8.7), (38.5, 9.6), (44, 10.3), (49.5, 10.8), (55, 11.1), (60.5, 11.2), (77, 11.2).  Hull planking will be no more than 1/4 inch thick; thus, I plan frames every 11 inches for support and accuracy. 

"B" squared (1, 4, 9, 16, 25, 36, 49, 64, ....) is multiplied by 0.1 (or other selected slope coefficient) and subtracted from the total offset of 11.2 inches until we reach the section where X is between 16.5 and 0, then we have a constant slope x/y=1.6/5.5.  That is a very easy computation to create a fair curve.

This major chine description is then used as the basis for projections downward to the keel and upward, with multiple secondary chines, until reaching the selected sheer height.

Should I next explain how to use projections to create surfaces?  This was previously covered in "New Kayak design, part 2".