Index of Entries, 9/25

 Find a topic of interest in the lefthand column and note the associated date (month/year), then click on the associated year in the righthand column, and you should find your chosen entry nearby.

Index of Blog Entries                      9/25

Designing a New Hull Shape          9/25

What should I Build Next?              9/25

Planking the New Kayak                6/25

Putting the Pieces Together             3/25

New Kayak Design, Part 2              1/25

Creating a New Kayak                    12/24

A 'Leaner' Kayak                             12/24

 Boating is more Satisfying....          8/24

What is Next?                                   6/24

Careers and a Hobby                        6/24

A Smaller Kayak                              12/23

Finishing the Planked Hull                7/23

Rules for Developable Hull surfaces 6/23

Finalized kayak Design                      1/23

Starting a New Design: Kayak           1/23

Now I Have a Boat to Look at            8/22

Next Step in Design Evolution          11/21

A Real Sharpie                                    3/21

Another Guide Boat                            2/21

Finishing the Guide Boat                    12/20

Finishing the Planking                        5/20

Creating a Developable Surface         5/20

Solving the Hull Sheathing Conform. 4/20

Planking the Guide Boat                     9/19

Garboard Sheathing                            7/19

Viking Ship Museum, Hull Fairing     6/19

Defining the Shape                              3/19

Creating a Boat 'Skeleton'                    3/19

Starting to Cut Wood                            2/19

First Steps for the New Design            12/18

The Improved Guide Boat                   10/18

Getting Ready to Build                         7/17

Completed New Model                         9/16

New Design Model, Part II                   8/16

Creating a Model for a New Design     8/16

Beautiful Boats of Scandinavia             7/16

Vietnam Memories                                10/15

Along the Adriatic Coast                       10/15

Grand Tetons N.P. Boating                     8/15

Modified 'Next Boat' Design                  4/15

Sail Design                                              2/15

Next Boat?                                              12/14

A Day at the Lake                                    9/14

Resting on its Design Waterline              7/14

At Flaming Gorge, Utah                          7/14

What a Day!                                             5/14

The New Boat Looks Complete               3/14

Why I use Rosin Paper                             3/14

The Boat Windshield                                2/14

Winter Progress                                         2/14

A Voyage to Remember                             11/13

Instrument Panel                                        11/13

Now for the Accessories                            10/13

Sample Developable Design Calculation   7/13

To the Deck and Onward                            7/13

Slow but Steady Progress                           5/13

Finally, the Hull is Turned Over                 1/13

Hull Sheathing                                            7/12

The Origin of Boat Bowls                           4/12

Another Year, Another Boat                        4/12

First Season Report                                     9/11

A Trial Run                                                  6/11

Finally in the Water!                                    5/11

Out of the Shop                                            12/10

Ready to Leave the Shop                             10/10

Finishing the Stern, Onto the Windshield     7/10

Wood Decking                                               7/10

Interior Details                                               6/10

Finally, the Hull is Upright                            4/10

Planking the Hull                                          11/09

Initial Hull Sheathing                                      8/09

The Design Becomes a Reality                       5/09        

Hull Design Using Simple Mathematics       12/08

Design Evolution                                             7/07

New Direction                                                 7/07

Model Lobster Boat                                       11/06

Updated Drawings                                           9/06

Maiden Voyage                                                5/06

A Semi-planing Powerboat                              5/06

Guide Boat Pictures                                         5/06

Adirondack Guide Boat Concept                     5/06

A Real Disappointment                                    5/06

Panama Skiff                                                    5/06

Kayoe or Canak?                                              5/06

Where did this Unusual Interest Originate?     5/06

Designing a New Hull Shape

 The initial boat type, pictured in my mind, was of a slender canoe which could be paddled with a double-bladed paddle.  Speed was not a goal, reduced weight (partial deck) and slightly more forgiving stability were the goals.  The first thing was to picture the midships cross section; a bottom slightly wider and flatter.  I 'played with numbers' in an equation, used to define the major chine.  I could alter the coefficients of X, Y, Z in parabolic equations to get the right length (X), width (Y), and upsweep (Z) that I was seeking.

Next, I needed to decide the X:Y:Z ratio in the bottom projection; get the midships deadrise desired with progressively steeper deadrise approaching the stems.  In order to achieve this, the major chine needed to be reconsidered.  Position and spacing of frames needed to be included as well as width of the keel.  The Y:Z ratio is determined by the desired deadrise angle amidships.  The X:Y ratio is determined by the bow half angle of the major chine.  

Creating the topsides is perhaps most critical.  At this point, I had to start over with all new numbers for the equation for the major chine; however, there were multiple choices/combinations to pick from.  Incorporating three more projections to create a more rounded topsides shape, I discovered, would result in a hull that was wider than desired.  I used a paper sketch to help decide the coefficients for my topside projections.  I had to choose a major chine equation with less beam (Y).  Iterative process, but I was making progress.

When I started to achieve harmony between all the equations and coefficients, I had more aspects to consider.  Just how slender do I want this hull to be?  What should the overall length be?  What should the sheer look like?  How much depth amidships?   Height at the stems?  Should I consider creating a transom at one end; should the hull shape be symmetrical or should one end be slightly more tapered?  But those factors are not requirements- they are choices to create the specific boat you want.

With the offsets already generated, I needed to make two more projections: first to see a lateral view of the stems and secondly to see the shape of the plank keel.  All offsets need to be charted on paper before I can visualize the result.  (Hey, all I use is a TI pocket calculator: no computer screen.)

Full-size paper patterns for the frames, stems, and keel are complete, a little drafting practice.  Not sure they are interesting enough to post (pencil on rosin paper), but the cross-section shape is satisfyingly rounded.  I plan to add some partial decking at the ends.  The major dimensions will be 156" (13 feet) long, 30" wide, and 12" deep.

Thus far, my description has only been in generalities, should I post a table of numbers?  It will be some time before I can start building.  I do already have the plank keel lumber on hand.  Next task will be designing the frames and developing a list of materials.  

     

What should I build next?

 When we were out on a lake recently with our kayaks, I noted that rarely was speed the goal when paddling; we were just poking around in the channels of a flooded forest in a reservoir backwater, seeing ducks, geese, and even eagles.  And I thought, "I could build a boat for that type of outing."

I have started sketching out the dimensions for such a boat:  I imagined: a bit shorter, wider, and more open, less decking in order to reduce weight.  Right now, I am considering a hull 156" long and 30" wide, but I still have more numbers to calculate and sketches to create.  I envision it as a double-ended-paddle canoe, but right now I only have numbers to look at.   

I don't see any making any further modifications to my latest kayak design/build.  It fits our uses well, but the joy and challenge of building another boat is still calling.  This could be my next project.